Landis
Hollow Milling Program:
Landis Hollow Milling Cutters offer an easy, economical method to use a Landis Die Head
to turn, groove, form, point and face. Hollow milling cutters are similar to chasers, except they have a cutting instead of a threading
profile, and can be supplied for use with virtually any type of revolving or stationary head.
They have the same mounting configuration and come in the
same physical size as chasers.
Feed rates approximately equal to a single point tool,
"multiplied by
the number of hollow milling tools" can be
realized. The number of cutters in a set will vary from four to eight depending upon style and
model of the head. When using
a Landis machine with lead screw for hollow milling, 32 pitch
gearing is generally used.
Allows one spindle to hollow mill to a given diameter, the second spindle to thread it.
Offers the same tool efficiency and economy as a Landis chaser. Cutters are usable for 80% of
their original length and only the rake angle requires regrinding.
Tools can be uniformly advanced or retracted relative to the workpiece centerline to
determine the
cutting clearance that gives best machining results.
Program
Brochure:
Hollow Milling Program
